 |
Obviously this stuff sells like crazy but I would not waste my money on it. I had a really bad experience with this stuff. I was at the range shooting various 10mm brands off out of my Glock 20 and I get a failure to chamber after the third round in 15 round mag. I drop the mag. and look for a stovepipe or bad primer, nothing looks wrong. Finally I am puzzled and look down the slide into the barrel from the open chamber and guess what, I see half of the spent cartridge about a ¼ of an inch in the barrel. The other half of the cartridge is 5 feet to the right of me on the ground. It ripped the aluminum cartridge in half and sent half the cartridge into the barrel on the 3rd round. Well I couldn’t get the piece of cartridge out of my barrel after I took my Glock apart. I had to get the gunsmith to get it out. Luckily it never fully chambered the fourth round. The gunsmith told me he has seen it happen before with aluminum casings in 10mm with these Blazers. Don’t be cheap and spend the extra 2-3 dollars and get brass!!! Learned my lesson and hope you don’t need to learn yours. I still have 3 boxes of the stuff. The gunsmith told me to give it someone I don’t like.
Rating:  [1 of 5 Stars!] |
|
|
