Soft Unit for the following:
24 grm (7/8 oz)
28 grm (1 oz)
32 grm (1 1/8 oz)
Recoil is something we would rather not experience when firing a gun.
Whilst it is not possible to eliminate recoil altogether, with the ISIS Recoil Damper it is now possible to make it considerably more comfortable.
The reduction in felt recoil will not only make your shooting more comfortable and pleasurable, it will probably improve your accuracy as well.
A highly efficient, compact and lightweight recoil reducer that has the looks of a conventional recoil pad. Making the body of the unit from high quality impact-resistance polymer is a major breakthrough in recoil reducer design. There is virtually no alteration to the balance of the gun.
The Isis Recoil Reducer is the only unit of its kind and is manufactured in the
UK. The unit was developed and patented in 2001 and has sold very successfully
throughout the world since.
Each unit comes with easy to follow fitting instructions and a Lifetime Guarantee.
The main components of the ISIS are the top and bottom plates which are made
from high impact polymer to give a lightweight and very strong body which houses
the latest, lubricant free, linear bearings and hard anodised aluminium guide
The bulk of the energy absorption is due to the highly efficient miniature shock
absorber which is specially designed to maximise the reduction of the peak forces
created as a gun is fired.
Three systems are used to control the recoil effect: - a) the hydraulic shock
absorber that does the bulk of the work. b) The mechanical resistance of specially
manufactured springs which can be varied in strength, dependent on each individual
shooter and c) The pneumatic smoothing effect created by metered air release
as the unit compresses. These three mechanisms working together create a linear
deceleration of the gun over a very short distance (about ¼”) which
is hardly noticeable to the majority of shooters. The effect is that of a much
lighter cartridge being used and significantly less physical punishment transferred
to the body. Whilst this is obviously desirable to reduce the possibility of
physical damage it greatly reduces fatigue over long periods of sustained shooting
A thin heel plate or firm rubber pad is all that needs to be fitted to the unit.
The narrowness of the pad means that a minimum of stock length removal is needed
when fitting the unit and the balance or the gun can be maintained which is
very important to sporting and F.I.T.A.S.C. shooters.
The black leather trim gives the effect of a standard Recoil Pad fitted to the