Lee Breech Lock Challenger Reloading Press Kit
This kit includes the Breech Lock Challenger Press and three Breech Lock quick change bushings. You get a complete powder handling system, with the most convenient and repeatable perfect powder measure. Plus the Lee safety scale, the most sensitive and safest of all powder scales and fill your case with the included powder funnel. Case preparation tools include a cutter and lock stud to trim your cases. Lee chamfer tool chamfers the inside and outside of the case mouth and a tube of premium sizing lube is included. A small and large primer pocket cleaning tool completes the case preparation package.
The red epoxy coated frame is made of ASTM 380 aluminum with a yield strength of 48,000 PSI. By comparison, a gray iron casting has a yield strength of 29,000 PSI. The linkage and actuating arm are steel. The ram is 0.815" in diameter with a stroke of 3.50". For stability, over 65% of its surface is supported by bearing surface at all times. The operating mechanical advantage is approximately 7:1; 25 ft/lbs of force applied to the handle generates 175 ft/lbs at the ram; enough to minimize operating fatigue, but not so much to eliminate "feel" when seating primers. The actuating handle may be positioned left or right and length varied to adjust to effort required.
Mfg Item Num: 90030
Category: RELOADING PRESSES
Type :Reloading Press Kit
Material :ASTM 380 aluminum
Thread Size :